It is the major consideration of safe transportation of the products and this purpose can be achieved by installation of Ute canopy. At the time of travelling short or long distances you can get benefitted by installing the truck bed tops on the vehicle. It would be better to install the canopy to your vehicle for safety purpose of the cargoes so that they cannot get damaged from theft or unwanted weather conditions. Furthermore, it acts as a camper shell in case of overnight trips. Ute canopy Brisbane is designed in such a way so that it can easily be removed and installed.
The installation procedure
First of all you have to purchase service bodies for utes and for installing the canopy you have to first use some foam tape strips on front and edges of the Ute canopy. Take the measurement of front and sides of the canopy. Match the foam shape with size and along with the bottom rails, just lay its adhesive side to make sure the truck’s bed rails cannot get scratched at the time of pickup bed top and setting up.
Now you have to lift the canopy and settle it down on the rails. You can take the help of someone for lifting the unit and try to align the units with the rails.
After completion of this go inside the truck bed and fix the truck rails. You should adjust the Ute canopy to the rails with the help of hook mounting clamps. Loose the clams by opening the bolts of hook counter. On the canopy’s lip you have to place the upper half of hook clamp. Now wrap the pickup truck’s bed rail with the other end of mounting clamp. For securing the canopy to the truck you should turn the bolt in clockwise direction and again you have to hook the mounting clamp to the canopy’s corners.
The removing procedure
Go inside the Ute canopy of your vehicle and start losing up the bolts with the help of bolt removing equipment that are attached to the corners of the bed shield of your vehicle.
Unclamp the units if it is attached with clamps to easily uninstall them. If canopy is attached with any kind of break lights then do not forget to unplug the same and pack the wires in such a way so that they cannot get tangled.
In case the Ute canopy has too much weight then you can take the help of other people for lifting. Guide the helper for removing the canopy in proper way.
Ask them to go inside the truck to push the canopy in upward. Lift the canopy high so that your helpers have good grip on the canopy.
Now push out the unit towards the back so that it can completely get out.